Account and station setup
Create an account, log in, add a station, and keep each station organized inside your dashboard.
Wingbits Device Control Dashboard
Sila Control
Sila Control helps operators configure, connect, and manage their Wingbits and Hyfix station setup through a secure web dashboard. Register, add a station, run the guided commands, and use the dashboard as the central control panel for your device.
What the dashboard does
The dashboard is designed to guide users from account creation to a connected and manageable Wingbits/Hyfix station.
Command-based installation
Copy the client command and router command directly from the dashboard, then run them as instructed on your local setup device, such as Ubuntu, Raspberry Pi, or any supported Linux device.
Central device control
Connect the Hyfix Device, verify its status, and use dashboard buttons to manage the setup from one place.
Before you start
A quick checklist helps make the setup smoother and avoids using the wrong station commands.
Prepare your equipment
- Make sure you have access to the dashboard.
- Make sure your local setup device is connected to the internet.
- Make sure the Hyfix Device is powered on and connected as required.
Use the correct station
- Use only the commands generated for your own station.
- Complete each step in order and wait for the result before continuing.
Step-by-step setup guide
Follow the process in order. Complete each step and check the result before moving to the next one.
Important
Run the commands exactly as shown in your dashboard. Commands may be unique to each station. Do not share your station commands with other users.
Register a new account
Create your dashboard account at the Wing dashboard.
Log in to the dashboard
Use your account credentials to access your station workspace.
Add your station
Create a station record so the dashboard can generate the correct commands.
Copy the client command
Copy the client install command exactly as shown in the dashboard.
Run or use the client command as instructed
Install the client agent on your local setup device, such as Ubuntu, Raspberry Pi, or any supported Linux device.
Copy the router command
Copy the router setup command from the station page.
Apply the router command
Apply the router configuration so the local device can reach and route the Hyfix Device correctly.
Connect the Hyfix Device
Connect the Hyfix Device through Ethernet according to the station setup.
Verify dashboard status
Confirm that the station appears correctly and shows the expected online/reachable state.
Use dashboard buttons
Use the available buttons to control, manage, and monitor the station setup.
Using dashboard buttons
The buttons are there to guide normal setup work. Use them in order and check the result before moving on.
Recommended workflow
- Start with Add Station.
- Use Copy Client Command when preparing the local device.
- Use Copy Router Command when configuring the router or network step.
- Use status and check buttons after each step.
- Use restart or control buttons only when needed.
- Avoid repeating setup actions unless the dashboard instructs you to do so.
Central control panel
Use Sila Control as the main control point for station setup. It helps connect the client, configure routing, verify Hyfix reachability, and manage the device through dedicated dashboard actions.
Ready to manage your station?
Open the dashboard, register or log in, and start with Add Station.
FAQ
Quick answers for visitors getting started with Sila Control.
What is Sila Control?
It is the landing page and access point for the Wingbits Device Control Dashboard.
Where is the dashboard?
The dashboard is available at https://wing.silacontrol.com.
Do I need to be on the same network?
The dashboard is designed to work with a client agent that connects outward from the local device to the server.
What should I do first?
Register an account, log in, add a station, and follow the generated commands in order.
Can I use commands from another station?
No. Always use the commands generated for the exact station you are setting up.
What if my station does not show online?
Check that your local setup device has internet access, the Hyfix Device is connected correctly, and the client command completed successfully. Then refresh the dashboard status.